Nortel CS 1000 Manual page 126

126 SIPN configuration
Adding a D-Channel
Add a D-Channel using Element manager.
Procedure 59
Adding a D-Channel
Step
1
2
3
4
5
6
Adding a route
Add a route using Element manager.
Procedure 60
Adding a route
Step
1
2
3
4
5
6
7
8
9
Action
Select Routes & Trunk > D-Channels from the menu.
On D-channels list page select a number, for example, 5, for
D-Channel Number and DCH for type, and then click Add.
The D-Channels Y Property Configuration page appears.
Select DCIP for CTYP, ISLD for USR and SL1 for IFC.
Select BSCOPT and click Edit to configure Remote Capabilities
(RCAP).
On Remote Capabilities Configuration page select the ND2
check box, and MWI, and then click return.
Click Submit.
Action
Select Routes & Trunks > Routes and Trunks from the menu.
On the Route and Trunks page click Add route, and Customer
X.
The New Route Configuration page appears.
Select a number, for example, 6 for ROUT.
Select TIE for TKTP.
Select IAO for ICOG and enter a number, for example, 6 for
ACOD.
Select the VTRK check box, and enter the VTRK zone number,
for example, 1 for ZONE.
Select the Node ID of the signaling server for NODE.
Select SIP for PCID.
Select the ISDN check box.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--