Nortel CS 1000 Manual page 253

Change the view mode by using the view mode selection box
above the DAP list.
15 To move a DAP to the map, drag it onto the map. If you
accidentally release a DAP on the wrong position, you can
reposition it.
You can remove a DAP from the map, and return it to the DAP
list. Right-click the DAP, and choose the menu command Move
To.
After you place a DAP on the map, an autonumber function for
the Info field is activated. This function works only if the following
two items are true.
•
The previous DAP added must have an Info field in the form
{current floor number}{string}{number}, for example, 0R05.
These notations are used in the Site Survey; therefore,
consult the Site Survey manual for more information about
the notations.
•
The current DAP must have an empty Info field.
If both requirements are met, the current DAP has an Info field
assigned in the form {current floor number}{string}{number + 1},
for example, 0R06. The following figure shows the RPN data and
the Info field data in the Edit box pane, titled Current DAP.
16 Continue placing the DAPs until the DAP list is empty.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
Use the Location builder tool 253