Nortel CS 1000 Manual page 54

54 Site planning and hardware deployment
Procedure 12
Demarcating additional cell contours, centers and boundaries at the far end
of the building
Step
1
Figure 23
Example of deployment for cells 1C3 and 1C4
Identify new critical points.
Procedure 13
Identifying new critical points
Step
1
Action
Repeat the procedures
on the floor" (page 44) toProcedure 10 "Marking and labeling
new critical points" (page 52)
boundaries at the other end of the building. In
"Example of deployment for cells 1C3 and 1C4" (page
cells are formed around cell centers IC3 and IC4.
Action
Mark critical points adjacent to a critical point and on the
opposite side of the cell boundary area. (critical point = P11 in
Figure 24 "Identify new critical points (P11, P12, P13, P14, P15,
P16, P17)" (page
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
Procedure 3 "Identifying critical points
as necessary to mark new cell
--End--
55), where cell boundary area = IC2),
Figure 23
54), new