Nortel CS 1000 Manual page 136

136 SIPN configuration
Adding Gateway Endpoint for the signaling server
Add the Gateway Endpoint for the signaling server.
Procedure 74
Adding Gateway Endpoint for the signaling server
Step
1
2
3
4
5
6
7
8
Adding Gateway Endpoint for DAP redirect server
You must select one DAP to be the DAP Redirect Server. The NRS routes
all incoming requests from the SIP Gateway to the DAP Redirect Server,
and the DAP Redirect Server routes the incoming requests to appropriate
DAPs in the SIP DECT system.
Procedure 75
Adding Gateway Endpoint for DAP redirect server
Step
1
2
3
4
5
6
7
Action
Select Gateway Endpoints from the menu on the left.
In Gateway Endpoints (X), click Add.
Enter the SIP Gateway endpoint name, for example, 1155.
Enter an endpoint description, for example, SIP GW on the
Signaling Server.
Select Static SIP Endpoint for SIP support.
Select UDP for SIP Transport.
Enter the Static endpoint address (Signaling Server Node IP
address) 192.168.100.105.
Click Save.
Action
Select Numbering Plans > Endpoints from the menu on the
left.
In the Limit results to Domain fields, enter the existing service
domain, UDP domain, and CDP domain.
In the Gateway Endpoints (X) section, click Add
Enter the SIP Gateway endpoint of the DAP, for example,
DAP1 for Endpoint name.
Enter an endpoint description, for example, DECT Access
Point.
Select Static SIP Endpoint for SIP support.
Select UDP for SIP Transport .
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--