Nortel CS 1000 Manual page 174

174 SIPL configuration
Restarting DECT Access Points
You must restart the DECT Access Points (DAP) following software
upgrades.
Procedure 98
Restartng DECT Access Points
Step
1
2
Action
Start DAP manager by entering the following URL into an
internet browser: localhost/cds
The DAP manager IP DECT page appears.
Select Access Points from the menu on the left.
The Access Points page displays information about the DAPs.
DECT Access Points are identified by their Radio Part Number
(RPN). In the DAP Manager workspace, the status of the DAPs
appear. You can modify the RPN of a DAP by editing the RPN
field.
In the DAP manager task area, choose one of the following
options:
•
Reboot—Select this option to restart a selected DAP.
•
Reboot All—Select this option to restart all DAPs in the list.
•
Delete—Select this option to remove a DAP from the list.
The DAP takes a few minutes to restart.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.