Nortel CS 1000 Manual page 112

112 SIPN configuration
Procedure 46
Configuring Network Settings
Step
1
2
3
4
Action
In the Settings pane, click Network Settings.
The IP DECT Configurator Network Settings window appears.
Select the network card that is connected to the SIP DECT
system.
Select the Run TFTP server on this PC check box, and choose
one of the following:
•
If you use a Microsoft Windows TFTP server, selectWindows
TFTP server on this PC.
OR
•
If you use a built-in TFTP server, select 3com TFTP server
on this PC.
Configure the DHCP server.
•
If you use a Microsoft Windows DHCP server, click Apply.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.