Nortel CS 1000 Manual page 163

Basic (simple) SIP DECT configuration with CS 1000 SIP Line Gateway 163
3 In the General Settings window, enter the path to the firmware,
the DAP package file, for example, C:\tftpdroot\4910b427.dwl.
4 Click Apply.
Procedure 88
Configuring IP Settings
Step Action
1 On the Settings pane, click IP Settings.
The IP Settings page appears.
2 In the Multicast address field, enter 239.192.49.49.
3 Enter the DAP controller Configuration: DC IP address,
which is the IP address of the PC where your DAP controller is
installed. An example of this address is 192.168.100.10.
4 Enter the Proxy IP address, which is the SIP LINE Gateway
Node IP address, for example, 192.168.100.105.
5 Click Apply.
Procedure 89
Configuring Network Settings
Step Action
1 In the Settings pane, click Network Settings.
The IP DECT Configurator Network Settings window appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--
--End--