Create A Location File - Nortel CS 1000 Manual

•
•
•
•
•
Create a location file

Create a location file.

Prerequisites
•
Ensure that you have up-to-date maps of the building(s). You can
import a map of a building or floor from a bmp, .gif and .jpg file.
•
Ensure that you have a clear understanding of the sizes of the area
and the buildings. Ensure that the maps use a common scale; if they
do not, ensure that you understand how they differ.
Procedure 139
Creating a location file
Step Action
1 To start the IP DECT Configurator tool through the Start
menu, choose Start > All programs > DAP controller > DAP
Applications > Location Builder.
The Location builder window appears.
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
— RPN numbers
— MAC addresses
— Info field
The DAP list shows a list of DAPs not yet on the map. You
can drag these DAPs onto map.
To add values to the DAP list click File > Import, and add
new DAPs to the RPNadm.txt file.
In the Edit box area, you can edit properties of the selected
location, building, or DAP. After editing the values in the Edit
box, click Set to save your changes.
Use the Floor controls to add or delete a floor or assign the
location of a floor.
Use the Draw controls to add a DAP, a building, or a line.
Use the View controls to change the view of the Map pane.
Use the Options controls to customize display options.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Use the Location builder tool 249
--End--