Nortel CS 1000 Manual page 128

128 SIPN configuration
13
14
15
16
17
Configuring network access
Configure network access using Element manager.
Procedure 62
Configuring network access
Step
1
2
3
Creating ESN control block
If the ESN control block is not configured, create an ESN control block by
using Element manager.
Procedure 63
Creating ESN Control Block
Step
1
2
TN format: L s cu, where L = virtual superloop,
s = shelf, c = card, and u = unit.
Click Edit to configure Class of Service (CoS).
Select Digitone Dial Pulse (DTDP) for Dial Pulse.
Click Return Class of Service.
Select Advanced Trunk Configurations and select the Answer
and disconnect Supervision required (SUPN) check box.
Click Save.
Action
Select Dialing & Numbering Plans > Electronic Switched
Network from the menu.
Select Customer X > Network Control & Service > Network
Control Parameters (NCTL) > Network Control Basic
Parameters, and click Edit.
Click Submit.
Action
On the ESN page, select Customer X > Network Control &
Service > ESN Access Code & Parameters (ESN).
The ESN Access Codes and the Basic Parameters page
appears.
Enter 10 for MXDM/MXRL/MXIX/MXFC/MXFS/MXLC/MXSC, 9
for AC1, 6 for ERDT, 0 for MXSD.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--
--End--