Nortel CS 1000 Manual page 75

Estimated number of handsets for users
without wired telephones
32
33
34
35
36
37
38
39
40
Procedure 25
Adjusting for users without wired telephones
Step
1
2
3
4
5
High handset density deployment
The high handset density deployment includes limiting the expected
number of handsets for each cell center.
Use the high handset density procedure if instructed to
reengineering" (page
cell center.
Limit the anticipated number of handsets Limit the number of
handsets you anticipate for each cell center to the limits shown in
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
Adjusted estimated number of handsets for
Action
Count the number of user offices with handsets and wired
telephones (H&W), and record the number.
Count the number of user offices that have only wireless
handsets, (H).
Use Table 15 "Adjustment for users without wired telephones"
(page 74) to determine the equivalent number of H&W users and
record this number.
Add the numbers received from steps 1 and 3 to determine and
adjust the value for the number of users with wired telephones.
Use the first column of
wired telephones" (page 74)
cell as described in "Determining cell reengineering" (page 71)
72). Do not use more than one basestation for each
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
System deployment 75
each cell
62
64
66
69
71
73
76
78
80
Table 15 "Adjustment for users without
to determine if you must resize if the
--End--
.
inTable 14 "Cell
Table 14