Nortel CS 1000 Manual page 178

178 SIPL configuration
Prompt Response
TYPE FTR
n
CUST
...
PCA ON
...
Configuring Universal Extension
Universal Extension (UEXT) redirects incoming calls to the DAP. Key 0
corresponds with the DN, configured on the DAP. Key 1 HOT U is the
same number with a User agent DN prefix configured for SIP Line.
If you plan to create a Branch Office Configuration, see
configuration on Call Server" (page 145)
Use LD 15 to configure station control password length before you
configure the UEXT for SIP Line users.
Table 30
LD 11: Configure station control password length
Prompt Response
REQ CHG
TYPE FFC
n
CUST
x
SCPL
Use LD 11 to configure UEXT.
Packages 139, 415, and 417 must be enabled on the Call Server.
If you plan to configure Microsoft Office Communicator for your SIP
DECT handset, you must add the required settings to the UEXT block
(AST 0; CLS T87A). For the changes to take effect, you must save your
configuration using LD 43, and restart your system.
Table 31
LD 11: Add universal extension (UDP)
Prompt Response
REQ NEW
TYPE UEXT
n
CUST
Description
FTR_DATA
n = customer number
Enable Personal Call Assistant
Description
FFC_DATA
n = customer number
x = the maximum length of the password
Description
Add new extension
Universal Extension
n = customer number
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
"Perform
.