External Housing Installation; Installing A C4710 Basestation In An External Housing - Nortel CS 1000 Manual

.
Appendix

External housing installation

Consult the work order, and perform the steps in this section as required:
•
Procedure 151 "Installing a C4710 basestation in an external housing"
(page 275)
•
"Installing a C4710E basestation in an external housing with an
external antenna" (page 278)
•
"Mounting the cabinet on a wall" (page 280)
•
"Mounting the cabinet on a pole" (page 281)

Installing a C4710 basestation in an external housing

Install a C4710 basestation in an external housing.
Procedure 151
Installing a C4710 basestation in an external housing
Step
1
2
3
4
5
6
Action
Unlock the cabinet, and open the cabinet door.
Remove the foam cover and foam blocks from the cabinet.
Mount the swivel, and route the incoming cable through the
swivel.
Verify that the cable fits snugly into the waterproof inlet housing.
Connect the incoming cable to the connection box that is
delivered with the outdoor cabinet.
Connect the CAT5 cable that is inside the outdoor cabinet to the
connector box.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
275