Nortel CS 1000 Manual page 252

252 Location builder tool
8
9
10
11
12
13
14
To make it easier to create straight lines in freehand mode,
first click snap to grid, which will make it easier to draw
straight lines. Optionally, adjust the Grid Size.
If your buildings have only one floor, skip this step.
To add a floor, double-click the border line of the building to
which to add a floor.
A view of the building appears in the map panel. The Control
pane in the bottom part of the Location Builder shows the Floor
controls, as shown in the following figure.
Click Add Floor .
The Add Floor dialog box appears.
Enter the relevant data in the Add Floor dialog box, and click
OK.
You can add multiple floors at one time and copy the lines of the
current floor to the newly created floors. As well, you can add
lines to the new floors or edit existing lines.
At this point the location is filled with buildings, the buildings
have floors and the floors have lines. This is all the information
you require to provide a reference framework for the position of
the DAPs.
Choose one of the following:
•
If you have not added information to a RPNadm.txt file, go to
step 17, and manually add DAPs.
If you have added information to a PRNadm.txt file, go to step
12. and import the PRNadm.txt file
In the menu, choose File > Import.
The Import dialog box appears.
Browse to the RPNadm.txt file, and select it. Click Open.
A dialog box appears and prompts you to indicate your
preferences for the importing the RPNadm.txt file.
Ensure that Update DAPs already located is not checked, and
click OK.
A list of DAPs appears on the left side of the program window.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.