Import A System - Nortel CS 1000 Manual

234 System maintenance
Procedure 134
Exporting a system configuration
Step
1
2
3

Import a system

Import a system configuration.
Procedure 135
Importing a system configuration
Step
1
2
3
4
5
6
Action
Click Start > All programs > DAP controller > DAP
Applications > DAP configurator, to start the IP DECT
Configurator tool.
The IP DECT Configurator tool appears.
Click Modify system, and select the system to export.
Click Export system.
Use the window that appears to store the file on a location of
your choice and specify a file name.
Action
Click Start > All programs > DAP controller > DAP
Applications > DAP Configurator .
The IP DECT Configurator window appears.
If the system is active, click Activate / Deactivate / System
status to deactivate the system.
Click Import System.
Browse to the file that contains the system to import.
Browse through the configuration tabs, and ensure that all
settings are correct.
ATTENTION
DAP firmware is not added to the archive of the system, so you must
click Browse on the General settings tab, navigate to the folder where
the firmware file is stored, select the file, and click Open.
Click Activate / Deactivate / System status to activate the
imported system.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--
--End--