Nortel CS 1000 Manual page 119

Basic (simple) SIP DECT configuration with CS 1000 SIP Gateway 119
17 Select the days to receive archives, the date to stop sending
archives, and the maximum size of the attached archive.
18 Optionally, enter HTTP execution time out. HTTP execution
time out (specified in seconds) is a guarding timer for the ASP
scripts. For example, if the ASP Web pages tries to send an
archive and it takes longer than the time specified here, the
attempt is terminated.
19 If you check Use client resolution, you can no longer scroll
through lists; instead, the available information is broken
into pages. You can select pages using tabs. If this box is
unchecked, information is presented in a way that you can
scroll through it using the scroll bar. Note the information is still
chopped up into pages, but the pages contain (much) more
information.
20 Click Apply.
Procedure 51
Configuring other settings—Customer Information settings
Step Action
1 Click Customer Information .
The Customer Information window appears.
2 In the Customer Information window, enter customer
information.
This window is for administrative purposes only. The system
does not use this information
Procedure 52
Saving the system
Step Action
1 To save the new system you created with the IP DECT
Configurator, click Apply, and then click Save system.
2 If a message appears instructing you to activate the system, click
OK, and go to the last step in this procedure.
3 In the System Control pane in the left of the IP DECT
Configurator main window, click Activate/Deactivate/System
Status.
The Activate/Deactivate/System Status window appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
--End--
--End--