Nortel CS 1000 Manual page 89

The following procedures give examples of setting up the DHCP server
under Windows 2003 Server. This procedure also applies for Windows
2000 DHCP server, but with minor differences.
Procedure 35
Configuring DHCP server under Windows 2000 / 2003 server
Step Action
1 From the Start menu, through the settings in Windows 2000,
open the Control Panel in Windows.
2 Open Add/Remove Programs.
3 Click Add/Remove Windows Components.
4 Select Networking Services and click Details.
The Components window appears.
5 Select the Dynamic Host Configuration Protocol (DHCP)
check box.
6 Click OK.
7 Click Next.
8 Insert the Windows 2003 CD-ROM as prompted.
9 Finish the procedure using the instructions in the dialog box.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
DAP controller software 89