OTM 2.1 (and later) management and
configuration of IP Trunk 3.01 (and later)
Contents
Introduction
This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OTM 2.1 (and later) ITG Engineering rules . . . . . . . . . . . . . . . . . . . . .
OTM 2.1 (and later) network setup guidelines . . . . . . . . . . . . . . . . . . .
OTM 2.1 (and later) remote access configuration. . . . . . . . . . . . . . . . .
OTM 2.1 (and later) PC description . . . . . . . . . . . . . . . . . . . . . . . . . . .
OTM 2.1 (and later) PC hardware and software requirements . . . . . . .
Hard drive requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The OTM 2.1 (and later) PC application is designed to support both ITG 2.x
(ITG Trunk 2.0 and ITG Trunk 2.1) and IP Trunk 3.01 (and later). The OTM
2.1 (and later) application name is ITG ISDN IP Trunks.
IP Trunk
Description, Installation, and Operation
Page 229 of 644
229
230
230
231
233
234
235
Need help?
Do you have a question about the 1000 and is the answer not in the manual?