Brocade 8Gb Fibre Channel Switch Module - Hitachi CB 520H B1 Service Manual

No.
8 Power LED (PWR)
9 Status1 LED (ST1)
10 Identify LED (LOCID)

Brocade 8Gb fibre channel switch module

Table 1-37 LEDs and connectors on 8Gb Fibre Channel switch module
No.
1 Identify LED (LOCID)
2 Power LED (PWR)
3 Status LED
4 FC ports 0- 5
5 FC port diagnosis LED
1-34
Name
Amber-On
Green-On
Off
Green-On
Green-Blink During power-on diagnosis or booting
Red-Blink
Red-On
Blue-On
Off
Figure 1-45 8Gb Fibre Channel switch module
Name
Introduction
Hitachi Compute Blade 500 Series System Service Manual
State
Link failed.
Power-on and normal operation.
The power fails or no power supplied.
Normal operation.
software.
The over temperature threshold or any
warning conditions.
A serious error is detected
The switch module is identified
The switch module is not identified
State
Blue-On The switch module is identified
Off The switch module is not identified
Green-On Power-On and normal operation.
Off The power fails or no power supplied.
Green-On Normal operation.
Green-Blink During power-on diagnosis or booting
software.
Amber-Blink The over temperature threshold or any
warning conditions.
Amber-On An alarm state is detected
- These connectors are equipped with
optical modules (SFP+). Connect a fibre
channel cable to this optical module.
Amber-On Signal is received but not on line.
Description
Description