Removing a switch module dummy module
1
Put on an anti-static wrist strap.
.
2
Pull out the switch module dummy module from the bay while releasing
.
the lock tab as shown below.
Removing a management module dummy module
1
Put on an anti-static wrist strap.
.
2
Pull out the management module dummy module from the bay while
.
releasing the two lock tabs as shown below.
Removing a power supply dummy module
1
Put on an anti-static wrist strap.
.
2
Pull out the power supply dummy module from the bay while releasing
.
the two lock tabs as shown below.
5-128
Figure 5-161 Removing a switch module dummy module
Figure 5-162 Removing a management module dummy module
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual