Hitachi CB 520H B1 Service Manual page 298

3 Wait about five minutes until System Configuration and Boot
.
Management window is displayed.
The following procedure varies depending on the server blade model.
For an FC mezzanine card on CB 520A A1, CB 520H A1/B1/B2, or CB
540A A1/B1, perform the following procedure.
For an FC mezzanine card on CB 520X B1/B2/B3 or CB 520H B3/B4, skip
to
CB 520H B3/B4 on page
4 Press Esc in System Configuration and Boot Management window.
.
5 Press Y when Do you want exit Setup Utility is prompted.
.
6 Confirm BIOS version, and then press Ctrl + E key in the following
.
prompt.
7-4
Figure 7-2 Powering on the server blade
Confirming parameters of FC mezzanine card on CB 520X B1/B2/B3,
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
7-13.