Restoring The Iscsi Settings - Hitachi CB 520H B1 Service Manual

c
.
d
.

Restoring the iSCSI settings

This procedure shall be performed when the firmware version of management
module is A0179 or earlier, or the firmware version of server blade is as
follows.
When the server blade is CB 520H B2/B3/B4 or CB 520X B1/B2/B3, skip the
following procedure.
CB 520H A1/B1
CB 520A A1
CB 540A A1/B1
1 Click Power and select Power On in Remote console menu.
.
2 Power Control dialog box is displayed. Click Yes.
.
The target server blade is powered on.
Go to Rebooting the server before restoring FCoE settings on page
7-94. And go to Restoring FCoE settings on page
The server model is CB 520H A1/B1, CB 520A A1, or CB 540A A1/B1,
the management module firmware version is A0180 or later:
Server model
CB 520H A1/B1
CB 520A A1
CB 540A A1/B1
Go to Restoring the UMC and Personality settings on page
The server model is CB 520H A1/B1, CB 520A A1, or CB 540A A1/B1,
the management module firmware version is A0179 or earlier:
Server model
CB 520H A1/B1
CB 520A A1
CB 540A A1/B1
Go to Restoring the iSCSI settings on page
Server model
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
Firmware version
01-70 or later
02-38 or later
03-20 or later
Firmware version
01-69 or earlier
02-37 or earlier
03-19 or earlier
7-81.
Firmware version
01-69 or earlier
02-37 or earlier
03-19 or earlier
7-95.
7-90.
7-81