Figure 4-31 Backup configuration data for management module
6
The configuration data is backed up to the USB memory in the front panel
.
first.
After the backup process to the USB memory is completed, the Save as
window is displayed.
7
Select the backup location (folder) and enter the file name, and then click
.
Save.
Figure 4-32 Backup configuration data for management module
Tip: If you do not need to back up the configuration data to the local PC, click
Cancel in step 7. In this case, the configuration data is backed up just into
the USB memory in the front panel.
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
4-33