Replacing A Pcie Card In The Pci Expansion Blade; Removing A Gpu Adapter - Hitachi CB 520H B1 Service Manual

7 Close the top cover of PCI expansion blade. See
.
expansion blade on page 5-41
8 Install the PCI expansion blade. See
.
server chassis on page 5-16

Replacing a PCIe card in the PCI expansion blade

This procedure describes how to remove a PCIe card in the PCI expansion
blade.

Removing a GPU adapter

1 Put on an anti-static wrist strap.
.
2 Remove the target PCI expansion blade.
.
See
section.
3 Open the top cover of the PCI expansion blade.
.
See
4 Pull out the connector of optional power cable between the connection kit
.
and the mezzanine slot.
5 While holding the two portions marked with white circle, pull up the PCI
.
blade card adapter F/H straight upward.
Removing a PCI expansion blade from server chassis on page 5-15
Opening a top cover, PCI expansion blade on page 5-40
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
Closing a top cover, PCI
section.
Installing a PCI expansion blade into
section.
section.
5-81