Removing A Connection Kit L/P - Hitachi CB 520H B1 Service Manual

6 Close the top cover of server blade. See
.
on page 5-39
7 Close the top cover of PCI expansion blade. See
.
expansion blade on page 5-41
8 Install the PCI expansion blade. See
.
server chassis on page 5-16

Removing a connection kit L/P

1 Put on an anti-static wrist strap.
.
2 Removing a server blade with a PCI expansion blade.
.
See
section.
3 Opening a top cover of server blade and storage expansion blade.
.
See
cover, PCI expansion blade on page 5-40
4 Remove the connection kit F/H.
.
For details, see
5 Pull out the connector of the connection kit L/P in the PCI expansion blade
.
straight upward, and then turn over the connector toward server blade.
Figure 5-96 Installing connection kit F/H
section.
Removing a PCI expansion blade from server chassis on page 5-15
Opening a top cover, Server blade on page 5-38
Removing a connection kit F/H on page
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
Closing a top cover, Server blade
Closing a top cover, PCI
section.
Installing a PCI expansion blade into
section.
section.
and Opening a top
5-75.
5-77