Hitachi CB 520H B1 Service Manual page 333

Confirming the parameters of 16 Gb FC mezzanine card on CB 520H B2
To confirm the parameters of 16 Gb FC mezzanine card on CB 520X
B1/B2/B3 or CB 520H B3/B4, go to
card on CB 520X B1/B2/B3, CB 520H B3/B4 on page
1 Press Esc in System Configuration and Boot Management window.
.
2 Press Y when Do you want exit Setup Utility is prompted.
.
3 Confirm BIOS version, and then press Ctrl + E key in the following
.
prompt.
Figure 7-4 Powering on the server blade
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
Confirming parameters of FC mezzanine
7-13.
7-39