Replacing A Pci Card In Storage Expansion Blade; Removing A Pci Card - Hitachi CB 520H B1 Service Manual

Replacing a PCI card in storage expansion blade

This procedure describes how to remove a PCI card from the storage
expansion blade.

Removing a PCI card

1 Put on an anti-static wrist strap.
.
2 Remove the target storage expansion blade.
.
See
3 Open the top cover of the server blade. See
.
blade on page 5-38
4 Pull out the PCI card cage straight upward, as shown below.
.
5 Turn over PCI card cage.
.
6 Loosen a screw on the PCI card cage.
.
7 Pull out hinge with screw from the PCI card cage bracket.
.
5-68
Removing a storage expansion blade on page 5-11
section.
Figure 5-85 Removing the PCI card cage
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
section.
Opening a top cover, Server