Rebooting The Server Before Restoring Fcoe Settings - Hitachi CB 520H B1 Service Manual

Go to Restoring FCoE settings on page
End of "Restoring the UMC and Personality settings".

Rebooting the server before restoring FCoE settings

This procedure shall be performed when the server model is CB 520H
B2/B3/B4 CB 520X B1/B2/B3.
1 Click Power and select Power On in Remote console menu.
.
2 Power Control dialog box is displayed. Click Yes.
.
The target server blade is powered on.
3 Wait about five minutes until System Configuration and Boot
.
management window is displayed.
4 Press Esc in System Configuration and Boot Management window.
.
When the Do you want to exit ... dialog box is displayed, press Y.
When the server blade is CB 520H B2, go to
7-95.
When the server blade is CB 520X B1/B2/B3 and CB 520H B3/B4, go to
Restoring backed up CNA information on page 7-104
7-94
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
7-95.
Restoring FCoE settings on page