18
Enter 1 in Select No. line of Emulex CNA Utility dialog box, and then
.
press Enter.
Confirm whether the FW ver column for the replaced CNA mezzanine
card is correctly updated.
19
Enter q in Select No. line of Emulex CNA Utility dialog box, and then
.
press Enter.
20
Remove the check in Mapped check box in Client View pane of Virtual
.
Media Session window.
21
Remove the CD-ROM from the console PC.
.
Move cursor onto Power Off, and then press Enter.
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
7-79