Installing A Usb - Hitachi CB 520H B1 Service Manual

Installed
N/A
Installed
1 Put on an anti-static wrist strap.
.
2 Remove the target server blade. See
.
on page 5-6
3 Open the top cover of the server blade. See
.
blade on page 5-38
4 When a mezzanine card is installed in mezzanine slot #4, remove the
.
mezzanine card. See
5 While pressing the purple colored button, pull out the USB from the USB
.
slot.

Installing a USB

1 Put on an anti-static wrist strap.
.
2 Reverse the removal procedure.
.
Replacing a SD card enablement kit and SD card in CB 520H
B3/B4
This procedure describes how to replace the SD card enablement kit and SD
card from CB 520H B3/B4.
5-60
USB port
port 1 port 2
N/A
Installed
Installed
section.
section.
Removing a mezzanine card on page 5-51
Figure 5-74 Removing a USB
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
Location indicator
port 1
/dev/sdb N/A
N/A /dev/sdb
/dev/sdb /dev/sdc
Removing a full-wide server blade
Opening a top cover, Server
port 2
section.