Replacing A Pci Expansion Blade - Hitachi CB 520H B1 Service Manual

8 Align the connector and guide holes of the connection board of the
.
connection kit F/H with the male connector and guide pins on the main
board of the server blade, respectively.
9 Push in the connection board into the server blade straight downward by
.
pushing the portion indicated Push, and then close the two latches.
10 Push in the connector into the PCI expansion blade straight downward by
.
pushing the portion indicated Push, and then close the latch.
11 Close the top cover of Server blade. See
.
on page 5-39
12 Close the top cover of PCI expansion blade. See
.
expansion blade on page 5-41
13 Install the PCI expansion blade.
.
See
section.

Replacing a PCI expansion blade

The hot-swappable feature of the Hitachi Compute Blade 500 series system
allows a PCI expansion blade replacement with the server chassis power on.
This procedure describes how to replace a PCI expansion blade when the
server chassis power is on.
5-28
Figure 5-31 Installing connection kit F/H
section.
Installing a PCI expansion blade into server chassis on page 5-16
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
Closing a top cover, Server blade
Closing a top cover, PCI
section.