Lcd Touch Console - Hitachi CB 520H B1 Service Manual

For more information about the web console application, see Hitachi Compute
Blade 500 Web Console User's Guide.
The web console is basically connected to the management port #0 on
management module. The management LAN port #0 is a standard RJ45
connector and accepts both a cross-over cable and straight-through cable.

LCD touch console

An LCD touch console unit is optional. Connecting it to the USB port of the
front panel in a server chassis makes it easy to display the system status and
the failed part, and also to set up the configuration without a console PC and
web console application.
For more information about the LCD application, see Hitachi Compute Blade
500 LCD Touch Console User's Guide.
Hitachi recommends that the LCD touch console is available as the secondary
maintenance application.
The LCD touch console is directly connected to the USB port #0 or 1 on the
front panel module. The USB port #0 is a standard USB connector.
3-4
Figure 3-3 Connecting the console PC
Basic knowledge for replacement
Hitachi Compute Blade 500 Series System Service Manual