Hitachi CB 520H B1 Service Manual page 124

5 Enter operator as login name, and then press Enter key.
.
6 Confirm that the command prompt is indicated.
.
7 Enter enable, and then press Enter key.
.
8 Enter backup ftp < IP Address > < backup file name.dat> no-
.
software, and then press Enter key.
9 Enter upload, and then press Enter key.
.
10 Enter password, and then press Enter key.
.
4-36
Figure 4-35 Connecting to LAN switch module
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual