Server chassis
Maintenance mode ON
1
Select Resources tab and select Modules > All Modules > Chassis.
.
2
Click Action, and then select Chassis Maintenance mode ON if
.
replacing a fan module or power supply module, or select Front Panel
Maintenance mode ON if replacing the front panel.
3
The confirmation dialog box appears. Click OK.
.
4
Confirm that the chassis or front panel is highlighted and the message is
.
displayed.
Figure 4-16 Maintenance mode on
Figure 4-17 Highlighting the activated module
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
4-17