Switch Module - Hitachi CB 520H B1 Service Manual

Switch module

LID ON
1 Select Resources tab and select Modules > All Modules > Switch
.
Modules > a target module that you should replace.
2 Select Condition tab, and then click LID ON.
.
3 The confirmation dialog box appears. Click OK.
.
LID: OFF
1 Select Condition tab, and then click LID OFF.
.
2 The confirmation dialog box appears. Click OK.
.
Figure 4-6 LID on/off for management module
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
4-9