Switch Module - Hitachi CB 520H B1 Service Manual

4 Confirm that the selected module is highlighted and the message is
.
displayed.
Maintenance mode OFF
1 Click Action, and then select Maintenance mode OFF.
.
2 The confirmation dialog box appears. Click OK.
.
3 Confirm that the highlight of the selected module goes out and the
.
message is off.

Switch module

Maintenance mode ON
1 Select Resources tab and select Modules > All Modules > Switch
.
modules > a target module that should be changed into maintenance
mode.
2 Click Action, and then select Maintenance mode ON.
.
3 The current setting condition will be displayed. Click Confirm.
.
Figure 4-12 Maintenance mode on
Figure 4-13 Highlighting the activated module
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
4-15