Hitachi CB 520H B1 Service Manual page 403

Select Resources tab on the web console and select Modules > All
Modules > Server Blades > a target module that should be
diagnosed.
[For SMP CB 520X B1/B2/B3]
Select Resources tab on the web console and select Modules > All
Modules > Server Blades > Server Blade n of the SMP
configuration > Server Blade n (Primary) that should be diagnosed.
2 Select Condition tab.
.
3 Click Server blade Action and select Start remote console.
.
4 The remote console window is displayed.
.
Note: When the type of server blade is CB 520H A1/B1 with BMC of
before 01-27, the login screen of Web console is displayed. Login and
start the remote console. For login procedure, see
console by using server blade Web console. on page
Hitachi Compute Blade 500 Series System Service Manual
Figure 8-2 Starting the remote console
Figure 8-3 Remote console window
Diagnosing server blade
Starting remote
8-5.
8-3