9
Lift up the enclosure of the server blade.
.
Installing a server blade with a storage expansion blade
1
Put on an anti-static wrist strap.
.
2
Align the server blade onto the position indicated with blue circles in the
.
following figure, and then put the server on expansion blade.
3
Slide the server blade toward the expansion blade until it fixes.
.
(Confirm that the server blade does not slide toward opposite side.)
4
Open the top cover of the server blade. See
.
blade on page 5-38
Figure 5-15 Removing a server blade from the storage expansion
Figure 5-16 Removing a server blade from the storage expansion
section.
Figure 5-17 Installing a server blade on the storage expansion
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
blade
blade
Opening a top cover, Server
blade
5-19