Hitachi CB 520H B1 Service Manual page 317

21 Confirm the registered boot entry.
.
22 Repeat Step 16 to Step 21 for each entry, which status was indicated as
.
Used, if multiple boot entries are registered.
23 Press Esc several times until the following window is displayed.
.
24 Enter < another number > for the second port, and then press Enter key.
.
< another number > : 2 or 4
25 Repeat step 8 to step 23 to setup second port.
.
26 Power off the server blade.
.
Restoring parameter of FC mezzanine card when BIOS version is 2.12a13
1 The BIOS utility is displayed. Select < number > and then press Enter
.
key.
< number > : 1 or 3 the first port number of the failed card
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
7-23