Hitachi CB 520H B1 Service Manual page 422

2 The Connection Description window is displayed. Enter telnet1, and
.
then click OK.
3 Select TCP/IP (Winsock), enter < IP address > in the Host address,
.
and then click OK.
< IP address >:IP address for the target switch module. See
address setup procedure for switch module on page 4-18
4 The login prompt is displayed in the terminal.
.
5 Enter operator as login name, and then press Enter key.
.
6 Confirm that the command prompt is indicated.
.
7 Enter enable, and then press Enter key.
.
8 Enter cd /usr/var/update/, and then press Enter key.
.
9-6
Figure 9-5 Connecting to LAN switch module
Updating firmware
Hitachi Compute Blade 500 Series System Service Manual
Internal IP
section.