Installing A Pci Expansion Blade On The Shelf - Hitachi CB 520H B1 Service Manual

10 Put down the PCI expansion blade with server blade, and then lift up the
.
PCI expansion blade from the shelf.

Installing a PCI expansion blade on the shelf

1 Put on an anti-static wrist strap.
.
2 Align the PCI expansion blade onto the position indicated with blue circles
.
in the following figure, and then put the PCI expansion on the shelf.
3 Slide the PCI expansion blade toward the server blade until it fixes.
.
(Confirm that the PCI expansion blade does not slide toward opposite
side.)
4 Open the top cover of the PCI expansion blade.
.
See
5-32
Figure 5-37 Removing the PCI expansion blade from the shelf
Opening a top cover, PCI expansion blade on page 5-40
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
section.