Removing A Pass Through Mezzanine Card - Hitachi CB 520H B1 Service Manual

Removing a pass through mezzanine card

1 Put on an anti-static wrist strap.
.
2 Removing a server blade with a storage expansion blade.
.
See
3 Opening a top cover of server blade and storage expansion blade.
.
See
cover, Storage expansion blade on page 5-39
4 Loosen two screws on the bracket of pass through mezzanine component
.
in the storage expansion blade, and then remove it.
5 Open the lock tabs, as shown below.
.
5-64
Figure 5-78 Installing the mezzanine card
Removing a storage expansion blade on page 5-11
Opening a top cover, Server blade on page 5-38
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
section.
and Opening a top
section.