3
Put in the connection bracket, and then tighten a thumbscrew of the
.
connection bracket.
4
Turn over the connector of the connection kit L/P toward PCI expansion
.
blade, align the connector with the male connector on the main board of
the PCI expansion blade, and then push in the connector.
5
Install the connection kit F/H.
.
For detail, see
6
Close the top cover of server blade. See
.
on page 5-39
5-80
Figure 5-101 Installing the connection bracket
Figure 5-102 Installing the connection kit L/P
Installing a connection kit F/H on page
section.
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
5-76.
Closing a top cover, Server blade