Confirming The Iscsi Settings - Hitachi CB 520H B1 Service Manual

Confirming the iSCSI settings

This procedure shall be performed when the firmware version of management
module is A0179 or earlier, or the firmware version of server blade is as
follows.
When the server blade is CB 520H B2/B3/B4 or CB 520X B1/B2/B3, skip this
procedure.
CB 520H A1/B1
CB 520A A1
CB 540A A1/B1
1 Click Power and select Power On in Remote console menu.
.
2 Power Control dialog box is displayed, Click YES.
.
The target serve blade will power on.
3 Press Ctrl + P key when the following prompt was displayed.
.
4 PXESelection Utility window is displayed. Select the target controller,
.
and then press Enter key.
Go to Confirming the iSCSI settings on page
Server model
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
7-57.
Firmware version
01-69 or earlier
02-37 or earlier
03-19 or earlier
7-57