Replacing A Lithium Battery In Half-Wide Server Blade; Removing A Lithium Battery - Hitachi CB 520H B1 Service Manual

4 Close the top cover of server blade. See
.
on page 5-39
5 Close the top cover of PCI expansion blade. See
.
expansion blade on page 5-41
6 Install the PCI expansion blade. See
.
server chassis on page 5-16

Replacing a lithium battery in half-wide server blade

This procedure describes how to remove a lithium battery from the server
blade.

Removing a lithium battery

1 Put on an anti-static wrist strap.
.
2 Remove the target server blade.
.
See
3 Open the top cover of the server blade. See
.
blade on page 5-38
4 Tilt the lithium battery in the direction shown by the arrow, and then lift it
.
away from the battery holder.
5-86
section.
Removing a half-wide server blade on page 5-4
section.
Figure 5-103 Removing the lithium battery- CB 520A A1
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
Closing a top cover, Server blade
Closing a top cover, PCI
section.
Installing a PCI expansion blade into
section.
Opening a top cover, Server
section.