Server Blade - Hitachi CB 520H B1 Service Manual

Server blade

To identify TOD;
1 [For CB 520A A1, CB 520H A1/B1/B2/B3/B4, CB 540A A1/B1, and Non-
.
SMP CB 520X B1/B2/B3]
Select Resources tab and select Modules > All Modules > Server
Blades > a target module that should identify TOD.
[For SMP CB 520X B1/B2/B3]
Select Resources tab and select Modules > All Modules > Server
Blades > Sever Blade n of SMP configuration > a target module
that should identify TOD
2 Select BMC tab.
.
3 Check and record the some information for maintenance.
.
Figure 4-42 Identifying TOD clock information in BMC
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
Figure 4-41 Editing NTP
4-47