Installing A Dimm - Hitachi CB 520H B1 Service Manual

6 Open the DIMM socket ejector tabs and remove the DIMM from the DIMM
.
socket.

Installing a DIMM

1 Put on an anti-static wrist strap.
.
2 Ensure that the DIMM socket ejector tabs are in the open position.
.
3 Line up the spare DIMM with the socket.
.
4 Push the spare DIMM into the socket until the ejector tabs lock the DIMM
.
in place.
5 Ensure that the DIMM socket ejector tabs are in the close position.
.
Figure 5-50 Removing the USB enablement kit and air duct- CB
Figure 5-51 Removing the DIMM
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
520H A1/B1/B2/B3/B4
5-43