Server Blade (Uefi Settings); Hitachi Lan Switch Module Settings; Hitachi Fibre Channel Mezzanine Card Settings - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

BMC setting items include Asset Tag. Setting Asset Tag displays information
of the following items.
• Product name: On the management module Web console, Resources tab
> Modules > All Modules > Server Blades > Server Blade x >
Hardware tab
• Server Name on HCSM
When Server ABC is set to CB 520H A1 on Asset Tag, for example, the
following is displayed.
Server ABC (CB 520H A1)
Note: CB 520A A1 and CB 540A A1/B1 server blades do not support Asset
Tag.

Server blade (UEFI settings)

The UEFI settings can be configured by the management module. The setting
item is reflected when turning on the server blade. For details about setting
items, see the Hitachi Compute Blade 500 Series Web Console User's Guide.
Note:
• Since some items cannot be configured from the management module,
configure the setting by the UEFI setup menu.
• After the setting change, when the N+M cold standby switches between
server blades before you turn on the server blade, the changed setting
value is discarded. Therefore, the server blade starts up with data taken
over at N+M cold standby.
• If you set EFI during OS startup after powering on the server blade, the
setting may not be reflected depending on the timing. Change settings
when the server blade is powered off or after the OS starts up.

Hitachi LAN switch module settings

The Hitachi LAN switch module settings can be configured by the
management module. The setting item is reflected immediately. For details
about setting items, see the Hitachi Compute Blade 500 Series Web Console
User's Guide.
Note: Since some items cannot be configured from the management module,
configure the setting by the switch module console.

Hitachi Fibre Channel mezzanine card settings

The UEFI settings can be configured by the management module. The setting
item is reflected when turning on the server blade. For details about setting
items, see the Hitachi Compute Blade 500 Series Web Console User's Guide.
Hitachi Compute Blade 500 Series Management Module Setup Guide
Functional detail
2-53