Hitachi CB 520H B1 Service Manual page 387

No. Server model
4 The controller #0 and #1 are assigned to LOMs for CB 540A B1 (GGAGD0Bn-
.
with LOM).
Note: The Controller Selection Menu above is not displayed when none
of Emulex 10Gb CNA mezzanine card and LAN mezzanine card is installed
on CB 520H B1/B2 (with LOM model).
Note: The Personality for Emulex 10Gb LAN mezzanine card and LOM is
fixed to NIC.
9 Press Enter several times until Controller Selection Menu is displayed.
.
10 Select the second controller, and then repeat from step 7 to step 8.
.
11 When you are prompted continue?, press Y.
.
Press Esc several times until Do you want to exit from the utility
[Y/N]? is prompted, and then press Y.
12 Wait about five minutes until System Configuration and Boot
.
management window is displayed.
13 Press Esc in System Configuration and Boot Management window.
.
When the Do you want to exit ... dialog box is displayed, press Y.
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
1
# of CNA # of CTRL
2
Controller #
7-93