Hitachi CB 520H B1 Service Manual page 320

7 Enter appropriate number corresponding to the recorded setting before
.
the replacement, and then press Enter.
Press Esc to return to the previous window.
8 Repeat step 6 and step 7 while changing the selecting items in step 6 to
.
restore the recorded settings of PLOGI Retry Timer, Topology, Spinup
Delay, Auto Scan Setting, EDD 3.0, Start Unit Command,
Environment Variable, Auto Boot Sector, and Link Speed.
7-26
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual