Switch Module - Hitachi CB 520H B1 Service Manual

Tip: If you select Use backup in storage made on following date and
time in step 3, the configuration data is restored from the USB memory in
the front panel.

Switch module

The configuration data in switch module is NOT automatically backed up. You
should back up the configuration data manually before replacement.
You will need to know the switch module's IP address. See section
internal IP address for switch module on page 4-18
or restore the settings.
1Gb LAN switch module, 1/10Gb LAN switch module
To back up the configuration data
1 Click Start > Programs > Accessories > Communications >
.
HyperTerminal to boot up terminal software.
2 The Connection Description window is displayed. Enter telnet1, and
.
then click OK.
3 Select TCP/IP (Winsock), enter < IP address > in the Host address
.
box, and then click OK.
< IP address >:IP address for the target switch module. See
address setup procedure for switch module on page 4-18
4 The login prompt is displayed in the terminal.
.
Figure 4-34 Restore process is successful
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
Identify
when you want to backup
Internal IP
section.
4-35